Mazda RX-8 Workshop Manual page 2803

Diagnostic procedure
Step
INSPECT DRIVER-SIDE FRONT BUCKLE SWITCH CONNECTOR
1
WARNING:
Handling the component parts improperly can
accidentally operate (deploy) the air bag module,
which may seriously injure you. Read the service
warnings/cautions and the workshop manual before
handling the air bag system components.
(See
(See
Turn the ignition switch to the LOCK position.
Disconnect the negative battery cable and wait for 1
min or more.
Disconnect the driver-side front buckle switch
connector. (See
REMOVAL/INSTALLATION.)
Is there any malfunction of the driver-side front buckle
switch connector?
Inspection
AIR BAG SYSTEM SERVICE
AIR BAG SYSTEM SERVICE
FRONT BUCKLE
WARNINGS.)
CAUTIONS.)
Action
YesReplace the driver-side
front buckle switch wiring
harness.
No Go to the next step.