< Previous Next >
2011 - RX-8 - Restraints
DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION
WARNING:
Handling the air bag module improperly can accidentally deploy the air bag module, which
may seriously injure you. Read the service warnings and cautions before handling the air
bag module. (See
CAUTIONS.)
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for 1 min or more.
3. Remove the bolts.
4. Using a flathead screwdriver, lift the locking device carefully, however do not remove it.
AIR BAG SYSTEM SERVICE
WARNINGS.) (See
AIR BAG SYSTEM SERVICE