after the brake switch has been properly installed. If the brake switch is not
properly installed or the connector is connected before installation, the
clearance may be incorrect, causing a brake light malfunction. Therefore,
always verify that the brake switch is properly installed before connecting the
connector.
Once the brake switch clearance has automatically been adjusted, it cannot be
adjusted again. Therefore, replace the switch with a new one when replacing
the power brake unit or the pedal, or performing any procedure that changes
the pedal stroke.
21. Inspect shift lock operation. (See
SHIFT LOCK
INSPECTION.)
< Previous Next >
Back to Top
© 2010 Mazda North American Operations, U.S.A.