Mazda RX-8 Workshop Manual page 3022

2 VERIFY NUMBER OF REGISTERED KEYS
Using the M-MDS, perform the
PID/data monitor inspection and
confirm the number of registered
keys.
(See
[IMMOBILIZER
Are eight keys registered?
3 INSPECT KEYLESS CONTROL MODULE
Using the M-MDS, register the key
ID number.
(See
RELATED PARTS PROGRAMMING
[WITH KEYLESS ENTRY
(See
RELATED PARTS PROGRAMMING
[WITH ADVANCED KEYLESS ENTRY
AND START
NOTE:
Using the registered key, turn the
ignition switch to the ON position.
Is the DTC displayed again?
< Previous Next >
PID/DATA MONITOR TABLE
SYSTEM].)
IMMOBILIZER SYSTEM-
SYSTEM].)
IMMOBILIZER SYSTEM-
SYSTEM].)
Two or more keys
must be registered
to start the engine.
SECURITY LIGHT:
15
M-MDS:
B1601/P1260
© 2010 Mazda North American Operations, U.S.A.
YesUsing the M-MDS, clear the key ID numbers
as necessary, then go to the next step.
No Go to the next step.
YesReplace the keyless control module and
perform procedures for when replacing the
keyless control module only.
(See KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION.)
(See IMMOBILIZER SYSTEM-RELATED
PARTS PROGRAMMING [WITH KEYLESS
ENTRY SYSTEM].)
(See IMMOBILIZER SYSTEM-RELATED
PARTS PROGRAMMING [WITH ADVANCED
KEYLESS ENTRY AND START
No DTC troubleshooting completed.
SYSTEM].)
Back to Top