Mazda RX-8 Workshop Manual page 2930

< Previous Next >
2011 - RX-8 - Restraints
REAR SEAT BELT REMOVAL/INSTALLATION
CAUTION:
The ELR (emergency locking retractor) has a spring that will unwind if the retractor cover
is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work
properly. Therefore, do not disassemble the retractor.
1. Remove the rear seat. (See
2. Remove the front console. (See
3. Remove the rear console. (See
4. Remove the rear package trim. (See
5. Remove in the order indicated in the table.
1Bolt
2Rear seat belt
6. Install in the reverse order of removal.
REAR SEAT REMOVAL/INSTALLATION.)
CONSOLE REMOVAL/INSTALLATION.)
CONSOLE REMOVAL/INSTALLATION.)
REAR PACKAGE TRIM REMOVAL/INSTALLATION.)