Mazda RX-8 Workshop Manual page 2911

< Previous Next >
2011 - RX-8 - Restraints
AIR BAG SYSTEM SERVICE WARNINGS
Air Bag Module Inspection
Inspecting an air bag module using a tester can operate (deploy) the air bag
module, which may cause serious injury. Do not use a tester to inspect an air
bag module. Always use the on-board diagnostic function to diagnose the air
bag module for malfunctions.
Air Bag Module Handling
Before removing the air bag module or disconnecting the air bag module
connector, always turn the ignition switch to the LOCK position, disconnect the
negative battery cable, and then wait for 1 min or more to allow the backup
power supply of the SAS control module to deplete its stored power.
Handling a live (undeployed) air bag module that is pointed toward your body
could result in serious injury if the air bag module were to accidentally operate
(deploy). When carrying a live (undeployed) air bag module, point the
deployment surface away from your body to lessen the chance of injury in case
it operates (deploys).