Mazda RX-8 Workshop Manual page 3262

3 Turn the ignition switch to LOCK
position.
Remove the instrument cluster.
Disconnect the instrument cluster
connector.
Inspect the voltage between
instrument cluster wiring harness-
side connector terminal 1G and
terminal 1E.
Turn the ignition switch to the ON
position.
Is the voltage B+?
4 Turn the ignition switch off.
Inspect the instrument cluster
connector terminals for poor
connection (such as
damaged/pulled-out pins, and
corrosion).
Are the terminals normal?
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
short to ground. Repair or
replace the wiring harness,
then replace the fuse.
YesGo to the next step.
No Inspect the suspect wiring harness, then
repair or replace.
YesReplace the instrument cluster.
No Repair or replace the terminal.
Back to Top