Mazda RX-8 Workshop Manual page 2837

< Previous Next >
2011 - RX-8 - Restraints
DTC B2477
DTC B2477 Configuration error
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
Diagnostic procedure
STEP
INSPECT SAS CONTROL MODULE
1
Using the M-MDS, perform SAS control module
configuration. (See
CONFIGURATION.)
Is DTC B2477 displayed?
< Previous Next >
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection according to only the
detection conditions may cause injury due to an operating error, or damage
the system. When performing an inspection, always follow the inspection
procedure.
SAS control module configuration has not been performed correctly.
SAS control module configuration setting not implemented
SAS control module configuration error
SAS control module malfunction
INSPECTION
SAS CONTROL MODULE
ACTION
YesReplace the SAS control
module.
(See SAS CONTROL MODULE
REMOVAL/INSTALLATION.)
No DTC troubleshooting
completed.
Back to Top