< Previous Next >
2011 - RX-8 - Body and Accessories
DTC INSPECTION [INSTRUMENT CLUSTER]
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-
MDS.
When using the IDS (laptop PC)
When using the PDS (Pocket PC)
3. Verify the DTC according to the directions on the screen.
If any DTCs are displayed, perform troubleshooting according to the
corresponding DTC inspection.
4. After completion of repairs, clear all DTCs stored in the instrument cluster.
Select "Self Test".
Select "Modules".
Select "IC".
Select "Module Tests".
Select "IC".
Select "Self Test".