Vehicle Signal Check
1. Turn ignition switch to ACC or ON position.
2. Launch the diagnostic mode. (See
NAVIGATION
SYSTEM].)
3. Select "Vehicle Signal Check".
4. Verify the condition of the vehicle signal input to the display.
No.
Name
1 PKB
Display the PKB signal condition.
2 REV
Display the REV signal condition.
3 Microphone
Verify the microphone condition.
4 SPEED
Display the vehicle speed.
5 Menu
Return to the Diagnosis Menu.
6 TNS
Display the TNS signal condition.
This item does not operate because it is a manufacturer exclusive
item.
STARTING PROCEDURE FOR DIAGNOSTIC MODE [CAR-
Content/function