2. After the vehicle is identified, select the following items from the initialization screen of the M-
MDS.
When using the IDS (laptop PC)
When using the PDS (Pocket PC)
3. Verify the DTC according to the directions on the screen.
If any DTCs are displayed, perform troubleshooting according to the
corresponding DTC inspection.
4. Disconnect the M-MDS.
< Previous Next >
Select "Self Test".
Select "Modules".
Select "RKE".
Select "Module Tests".
Select "RKE".
Select "Self Test".
© 2010 Mazda North American Operations, U.S.A.
Back to Top