Mazda RX-8 Workshop Manual page 2863

< Previous Next >
2011 - RX-8 - Restraints
INSPECTION OF SST (DEPLOYMENT TOOL)
1. Before using the SST (49 H066 002), inspect its operation.
Inspection Procedure
1. Follow the steps below to inspect the SST (49 H066 002).
If not as indicated in the table, replace the SST (49 H066 002) because it has a
malfunction.
WARNING:
Do not use a malfunctioning SST (49 H066 002), otherwise it could cause the
air bag module or pre-tensioner seat belt to accidentally operate (deploy).
CAUTION:
Because the permissible voltage for the SST (49 H066 002) is 12 V, do not
connect a 24 V power source because it will damage the SST. Always connect
only a 12 V power source.
Step Inspection procedure
Light
condition