Mazda RX-8 Workshop Manual page 2641

< Previous Next >
2011 - RX-8 - HVAC
REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION [FULL-AUTO AIR
CONDITIONER]
1. Disconnect the negative battery cable.
2. Discharge the refrigerant from the system. (See
3. Hold the piping block with pliers or a similar tool and loosen the refrigerant pressure switch
using a wrench.
4. Remove in the order indicated in the table.
1Refrigerant pressure switch connector
2Refrigerant pressure switch
(See Refrigerant Pressure Switch Installation
5. Install in the reverse order of removal.
Refrigerant Pressure Switch Installation Note
REFRIGERANT CHARGING.)
Note.)