Mazda RX-8 Workshop Manual page 3195

4 Open any door.
Turn the ignition switch to the ON
position.
Push/pull the power window main
switch for the door glass within
approx. 43 s after ignition switch
off.
Verify that the door glass does not
move up or down.
Does the door glass move up or
down?
5 Close all doors.
Turn the ignition switch to the ON
position.
Push/pull the power window main
switch for door glass after approx.
60 s after ignition switch off.
Verify that the door glass does not
move up or down.
Does the door glass move up or
down?
Two-step Down Function Inspection
Before inspecting the two-step down function, make sure that the two-step down function
is turned on (if the two-step down function is turned off, the power window close not stop
once.).
Yes Inspect the door switch
and related wiring harness.
If above parts are normal,
replace the power window
main switch, then go to
the next step.
If the above parts have
any malfunction, repair or
replace the malfunction
part, then go to the next
step.
No Go to the next step.
Yes Perform the driver-side
power window initialization
procedure, and
reinspect.(See
WINDOW INITIALIZATION
PROCEDURE.)
No The IG OFF timer function
is normal.
Go to the two-step down
function inspection.
POWER
If
operation
is not
normal,
replace
the power
window
main
switch,
then go to
the two-
step down
function
inspection.