Mazda RX-8 Workshop Manual page 2599

< Previous Next >
2011 - RX-8 - HVAC
AIRFLOW MODE MAIN LINK REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the A/C amplifier. (See
CONDITIONER].) (See
3. Remove the airflow mode link set.
4. Remove the airflow mode main link as shown in the figure.
5. Install in the reverse order of removal.
< Previous Next >
A/C AMPLIFIER REMOVAL/INSTALLATION [FULL-AUTO AIR
A/C AMPLIFIER REMOVAL/INSTALLATION [MANUAL AIR
© 2010 Mazda North American Operations, U.S.A.
CONDITIONER].)
Back to Top