Mazda RX-8 Workshop Manual page 3113

< Previous Next >
2011 - RX-8 - Body and Accessories
CLEARING DTC [AUDIO]
CAUTION:
Before clearing the memory, be sure to enter all of the DTCs displayed in the on-board
diagnostic test mode in the Audio Repair Order Form.
1. Start the on-board diagnostic test mode.
(See STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE
2. While pressing the POWER/VOLUME switch, simultaneously press the AUDIO CONT switch for
2 s or more.
3. To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
[AUDIO].)
Back to Top