3Clock spring.
(See
Clock Spring Installation
6. Install in the reverse order of removal.
7. Turn the ignition switch to the ON position.
8. Verify that the air bag system warning light illuminates for approx. 6 s and goes out.
If the air bag system warning light does not operate normally, refer to the on-
board diagnostic system (air bag system) and perform inspection of the system.
Clock Spring Installation Note
CAUTION:
If the clock spring is not adjusted, the spring wire in the clock spring could over-wind and
break when the steering wheel is turned. Always adjust the clock spring after installing it.
1. Adjust the clock spring after installing it. (See
< Previous Next >
Note.)
© 2010 Mazda North American Operations, U.S.A.
CLOCK SPRING
ADJUSTMENT.)
Back to Top