< Previous Next >
2011 - RX-8 - Restraints
SEAT WEIGHT SENSOR INSPECTION
CAUTION:
If any of the following work is performed, perform the seat weight sensor inspection using
the M-MDS.
If any of the following work is performed, perform the seat weight sensor calibration using
the M-MDS. (See
1. Connect the M-MDS to the DLC-2 (16-pin).
2. After the vehicle is identified, select the following items from the initialization screen of the M-
MDS.
When using the IDS (laptop PC)
Removal of the passenger-side seat
Loosening and retightening of passenger's seat fixing bolts
Or, the vehicle is involved in a collision
SEAT WEIGHT SENSOR
Replacement with a new seat weight sensor
Replacement with a new seat weight sensor control module
Replacement with new passenger-side seat parts
Disassembly of the passenger-side seat
1. Select "Body".
CALIBRATION.)