Mazda RX-8 Workshop Manual page 2899

When using the PDS (Pocket PC)
3. Then, select item from the screen menu in the following order.
1. Select "Passenger Seat Weight Sensor ReZero".
4. Perform inspection following the procedures on the M-MDS screen.
CAUTION:
Because the seat belt rail is installed to the seat weight sensor bracket, do not apply a
load to the seat belt rail during the inspection.
< Previous Next >
2. Select "Restraints".
1. Select "All Tests and Calibrations".
© 2010 Mazda North American Operations, U.S.A.
Back to Top