Mazda RX-8 Workshop Manual page 2628

< Previous Next >
2011 - RX-8 - HVAC
AIR INTAKE ACTUATOR REMOVAL/INSTALLATION [FULL-AUTO AIR
CONDITIONER]
1. Disconnect the negative battery cable.
2. Remove the glove compartment. (See
3. Remove the keyless control module. (See
REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
1Air intake actuator connector
2Air intake actuator
5. Install in the reverse order of removal.
GLOVE COMPARTMENT
KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION.)