Mazda RX-8 Workshop Manual page 2311

CAUTION:
Do not to damage the contact surface of the transmission case and the oil pan.
Do not to deform the oil pan.
20. Install a new oil pan gasket and the oil pan to the transmission case.
CAUTION:
Be careful that bolts might be damaged if tightened too much since the gasket
is cork-made.
21. Install the bolts to the transmission case.
Tightening torque
6.0—7.9 N·m {62—80 kgf·cm, 54—69 in·lbf}
22. Connect the negative battery cable.
23. Install the battery cover.
24. Install the engine cover. (See
25. Add ATF and, with the engine idling, inspect the ATF level and for leakage. (See
AUTOMATIC TRANSMISSION FLUID (ATF) INSPECTION
26. Perform the mechanical system test. (See
27. Perform the road test. (See
< Previous Next >
ENGINE COVER REMOVAL/INSTALLATION
ROAD TEST
© 2010 Mazda North American Operations, U.S.A.
[SJ6A-EL].)
MECHANICAL SYSTEM TEST
[SJ6A-EL].)
[13B-MSP].)
[SJ6A-EL].)
Back to Top