Mazda RX-8 Workshop Manual page 2295

< Previous Next >
2011 - RX-8 - Transmission/Transaxle
OIL SEAL (OIL PUMP) REPLACEMENT [SJ6A-EL]
1. Remove the automatic transmission. (See
REMOVAL/INSTALLATION
CAUTION:
The oil seal is easily damaged by the sharp edges of the torque converter
splines. Do not let the splines contact the oil seal.
Do not drop the torque converter.
Do not pinch fingers.
2. Remove the torque converter. (See
EL].)
CAUTION:
Do not to damage the bushing on the oil pump body.
3. Remove the oil seal from the oil pump body using the SST.
4. Using the SST and a hammer, install the new oil seal to the oil pump body.
AUTOMATIC TRANSMISSION
[SJ6A-EL].)
TORQUE CONVERTER REMOVAL/INSTALLATION [SJ6A-