Mazda RX-8 Workshop Manual page 2951

< Previous Next >
2011 - RX-8 - Body and Accessories
DTC INSPECTION [ADVANCED KEYLESS ENTRY AND START SYSTEM]
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-
MDS.
When using the IDS (laptop PC)
When using the PDS (Pocket PC)
3. Verify the DTC according to the directions on the screen.
If any DTCs are displayed, perform troubleshooting according to the
corresponding DTC inspection.
4. After completion of repairs, clear all DTCs stored in the keyless control module. (See
CLEARING DTC [ADVANCED KEYLESS ENTRY AND START
1. Select "Self Test".
2. Select "Modules".
3. Select "RKE".
1. Select "Module Tests".
2. Select "RKE".
3. Select "Self Test".
SYSTEM].)