Mazda RX-8 Workshop Manual page 2253

< Previous Next >
2011 - RX-8 - Transmission/Transaxle
TURBINE SENSOR INSPECTION [SJ6A-EL]
CAUTION:
Water or foreign material entering the connector can cause poor connections or corrosion.
Be sure that water or foreign material do not enter the connector when disconnecting it.
1. Remove the engine cover. (See
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Disconnect the turbine sensor connector.
CAUTION:
Do not apply a shock in the turbine sensor.
Do not damage the terminals.
5. Measure the resistance between the turbine sensor terminals.
ENGINE COVER REMOVAL/INSTALLATION [13B-MSP].)