Accessing Avaya Iw; Access And Run The Avaya Iw Using A Laptop Computer - Avaya G250 Administration

Accessing the Avaya G250/G350 Media Gateway

Accessing Avaya IW

The Avaya Installation Wizard (Avaya IW) is a web-based installation wizard that is used with
the Avaya G250/G350 Media Gateway to perform initial configuration tasks and to upgrade
software and firmware. The Avaya IW is designed for use with systems that include an S8300
Media Server, operating in either ICC or LSP mode. See
Controller (MGC)
Specifically, you can perform the following tasks with the Avaya IW:
Configure PMI and SNMP information, Ethernet interfaces, primary and secondary Media
●
Gateway Controllers, G250/G350 telephony and trunk parameters, and alarms
Install license and password files, software and firmware upgrades
●
Enable and configure the USB ports of the S8300 and G250/G350 for modem use
●
Change your password
●

Access and run the Avaya IW using a laptop computer

1. Connect a laptop computer to the Services port of the S8300, using a crossover cable.
2. Make sure the laptop is configured according to the following table:
3. Launch Internet Explorer on the laptop and type the following URL to access the S8300
Media Server Home Page: http://192.11.13.6.
4. Enter the appropriate login name and password.
5. Select the Launch Installation Wizard link from the home page. The Overview screen
appears:
40 Administration for the Avaya G250 and Avaya G350 Media Gateways
on page 71.
Table 2: Laptop configuration
Laptop setting
IP Address
NetMask
DNS
Primary and
secondary WINS
IP Addresses
Proxy Server in
Internet Explorer
Configuring the Media Gateway
Value
192.11.13.5
255.255.255.252
disabled
cleared
disabled