Displaying 802.1X Parameters - Avaya G250 Administration

Use the set dot1x max-req command, followed by a number from 1 to 10, to set the
●
maximum number of times the port tries to retransmit requests to the Authenticated Station
before the session is terminated for all ports on which 802.1x is enabled.
Use the set port dot1x max-req command, followed by the module and port number
●
(or range of ports) and a number from 1 to 10, to set the maximum number of times the
port tries to retransmit requests to the Authenticated Station before the session is
terminated for a specific port or ports.
Use the set port dot1x server-timeout command, followed by the module and
●
port number (or range of ports) and a time period in seconds (1 to 65535), to set the server
timeout (the time to wait for a reply from the Authentication Server) per port.
Use the set dot1x lldp tlv command to specify that if LLDP is enabled, then upon
●
802.1x authentication of a supplicant, the G250/G350 transmits the port LLDP information
(PVID, Port Vlan) in the LLDP packet sent to the supplicant.

Displaying 802.1x parameters

Use the show dot1x command to display the system 802.1x parameters, including
●
whether 802.1x is enabled or disabled on the G250/G350 and the Supplicants' status.
Use the show port dot1x command to display all the configurable values associated
●
with the authenticator port access entity (PAE) and backend authenticator. To display
values for a particular port, type the module and port numbers after the command. If you
do not enter a module and port number, the command displays values for all ports on
which 802.1x can be configured. For example:
Port PortAuth
Number Mode
------ --------- -------- ---- ------ ------ ------- ------- ------ ---
6/1 PortBased Auto
6/2 PortBased Auto
Port Total Authenticated Authenticating
Number Supp
------ ----- ------------- --------------
6/1 0
6/2 0
Port Re Quiet
Control Auth Period Period Timeout Timeout Period Req
Disa 60
Disa 60
Supplicants Supplicants
0 0
0 0
Managing login permissions
ReAuth Server Supp
3600 30 30
3600 30 30
Issue 3 February 2007
Tx Max
30 2
30 2
55