Avaya G250 Administration page 131

3. Type display media-gateway and press Enter and read the reported IP address for
this gateway.
4. Type list node-name ip and compare the IP address of the media gateway in the list
with the IP address of the gateway that you are administering for SLS. When you find a
match in the node-name ip form, read the assigned node-name. This will be used to do a
pattern match with a field on the IP Station form in Step 5.
5. Type list station type type, where the type is any of the supported IP stations.
The report lists all IP phones that could have the Survivable GK Node-Name
administered to the target media gateway. The Survivable GK Node-Name uniquely
associates an IP phone with a particular media gateway.
6. Once a match is made between the station form's Survivable GK Node-Name and the
target gateway's Node-Name, gather the values for the given IP station per
Table 14: IP station form data to assemble for SLS
*
Page Field Name
1 Extension
1 Port
1 Security Code (IP only)
1 Type
1 Survivable COR
1 Survivable Trunk Dest
1 Expansion Module
1 Name
* Page numbers might vary for your system.
Notes
Should just be specified as slot = 0 and port = ff.
This value is the shared secret between
Communication Manager and the media gateway
used for the registration of the IP endpoint.
4601
4602
4602SW
4606
4610SWf
4612
4620
4620Sw
4621
4622
4624
4625
Class of Restriction while in SLS mode
Trunk destination while in SLS mode
Determines if optional CA module is connected to this
phone model
This is the user's name
Configuring SLS
Table 14.
Issue 3 February 2007 131