Avaya G250 Administration page 154

Configuring Standard Local Survivability (SLS)
Example
set cor unrestricted gives a station unrestricted dialing.
●
5. If this station is administered to be included into a pool of stations that are allowed to
receive incoming analog loop-start trunk calls, type set trunk-destination yes.
6. If this is an IP phone (set in Step 1), type set password password, where password is
between 4 and 8 digits in length, to administer a password.
Note:
Passwords are not required for analog or DCP phones, unless an IP Softphone is
Note:
using the administrative identify of a DCP phone, in which case the password is
required.
Example
set password 53136 establishes the password "53136" on a
●
previously-administered IP phone.
7. To enable DCP or IP phones (set in Step 1) to have an expansion module, type set
expansion-module yes.
8. For analog phones (set in Step 1) that you want SLS to recognize the switchhook flash
signal that offers subsequent transfer features, type set swhook-flash yes.
9. Type set name name to identify the user name for the station. Use the 1-27 character
name as specified on the Communication Manager form. Type the name string inside
double quotes.
10. Type show to check the station administration of the station being programmed.
The report lists the station parameters:
Extension
---------
49139
Note:
For currently-registered IP phones or IP Softphones, the IP address is displayed.
Note:
11. Type exit to leave the station context in SLS.
154 Administration for the Avaya G250 and Avaya G350 Media Gateways
Type Port Cor
---- ---- ----- ---------
ip4620 IPaddr local y
ip station registered at address 'aaa.bbb.ccc.ddd'
Trunk-Des Exp-Mod
-------
n
Flash Password
------- --------
- ********