Avaya G250 Administration page 163

Table 30: G350 SLS group type assignments (continued)
Group type Media module
bri MM722
t1-isdn MM710
t1-isdn MM710
e1-isdn MM710
e1-isdn MM710
t1-inband MM710
e1-inband MM710
Example
trunk-group 1 loop-start establishes an analog loop-start trunk group
●
number 1.
2. Type set dial dial-type, where dial-type is either rotary or dtmf.
Example
set dial dtmf establishes that the trunk group uses DTMF signaling.
●
3. Type set tac tac, where tac is a 1-4 digit numeric value (plus initial "#" and "*" on all
but rotary dial phones) for this trunk's access code (TAC). The TAC value must be unique
among all trunk groups, extension numbers, and ARS Feature Access Code (FAC) strings.
Example
set tac 88 establishes access to this trunk group by dialing "88".
●
4. Type add port module port sig-group to specify the virtual integrated port (for
G250/G350) or media module port (for G350) that is compatible with the device and/or
media module (see
Table 33 for G250 digital trunks, and
The sig-group argument is necessary for a digital ISDN-PRI trunk. It is an integer
number from 1 to 650 that specifies the signaling group associated with the management
of this trunk member.
Number of
ports/channels
4
23
24
30
31
24
30
Table 31 for G250 analog trunks,
Table 34
Description of trunks that may be
assigned
Two physical ports, each offering B1
and B2 channels
D-channel is associated with this
facility (FAS)
D-channel is not associated with this
facility (NFAS), and the DS1's
signaling-mode is set to isdnext
D-channel is associated with this
facility (FAS)
D-channel is not associated with this
facility (NFAS), and the DS1's
signaling-mode is set to isdnext
Table 32 for G350 analog trunks,
for G350 digital trunks).
Issue 3 February 2007
Configuring SLS
2 of 2
163