Accessing Giw - Avaya G250 Administration

Figure 1: Avaya IW Overview screen
For step-by-step instructions how to configure the G250/G350 using the Avaya IW, see
Installing and Upgrading the Avaya G250 Media Gateway, 03-300434 or Installing and
Upgrading the Avaya G350 Media Gateway, 03-300394.

Accessing GIW

The Gateway Installation Wizard (GIW) is an automated tool that allows you to perform a
streamlined installation and configuration of a G250/G350 that does not include an S8300
Media Server. You can use the GIW to perform initial configuration of the G250/G350 and to
upgrade software and firmware. Specifically, you can perform the following tasks with the GIW:
Configure PMI information — see
●
page 70
Configure SNMP information — see
●
Configure primary and secondary Media Gateway Controllers — see
●
Media Gateway Controller (MGC)
Check connectivity between the G250/G350 and its Media Gateway Controller
●
Display information on the G250/G350 and media modules installed on the G250/G350
●
Configuring the Primary Management Interface (PMI)
Configuring SNMP
on page 71
Accessing GIW
on page 289
Configuring the
Issue 3 February 2007
on
41