Avaya G250 Administration page 350

Configuring monitoring applications
Table 48: Detailed CLI output per RTP session (continued)
Field
Seq-Fall
DSCP
L2Pri
RTCP
Transmitted-RTP:
VLAN
DSCP
L2Pri
RTCP
Remote-Statistics:
(Remote-Statistics items are calculated and evaluated upon reception of RTCP messages)
Loss
rem-loss%
#rem-loss-ev
Avg-Loss
Jitter
rem-jitter
#rem-jitter-ev
350 Administration for the Avaya G250 and Avaya G350 Media Gateways
Label Description
This counter increments each time an
46
RTP packet with a sequence number
less than the last known sequence is
received. Packet resequencing may be
caused by switching to a backup WAN
interface or route flaps.
The last received DSCP value of the
47
RTP packets.
The last received L2 priority value of an
48
RTP packet (usually IEEE802.1p).
The total number of received RTCP
49
packets.
The VLAN-ID on which the RTP
50
packets are transmitted.
The DSCP of RTP packets.
51
The Layer 2 priority of transmitted RTP
52
packets (usually 802.1p).
The total number of transmitted RTCP
53
packets.
The network loss experienced by the
54
remote RTP receiver. The local RTP
receiver learns about its remote peer
statistics from RTCP packets.
The number of samples that were over
55
the rem-loss threshold.
The average network loss experienced
56
by the remote RTP receiver.
The network jitter experienced by the
57
remote RTP receiver.
The number of samples that were over
58
the remote jitter threshold.
From the CLI
example
Seq-Fall 0
DSCP 46
L2Pri 12
RTCP 54
VLAN 1
DSCP 184
L2Pri 6
RTCP 62
54
Loss 0.0% #0
55
Loss 0.0% #0
Avg-Loss 0.0%
57
Jitter 0mS #0
58
Jitter 0mS #0
5 of 6