Avaya G250 Administration page 141

3. At the SAT, type list ars analysis and press Enter to search the ARS Analysis table
for row entries whose Route Pattern field matches the route-pattern value(s) that were
obtained in Step 1. Once you discover a match with Route Pattern, use the entries from
this row in the ARS Analysis table to complete the following three entries for the SLS
Dial-Pattern table (see
a. Min
b. Max
c. Dialed String
Table 21: ARS Dial Patterns for SLS
CM Form
Route-Pattern
Route-Pattern
ARS Analysis
ARS Analysis
ARS Analysis
Collecting Incoming Call Handling data
To gather the Incoming Call Handling Treatment and ARS Digit Conversion information in
Communication Manager, you must first know which trunk groups are assigned to the gateway
of interest. Then:
1. At the SAT, type display inc-call-handling-trmt trunk-group n, where n is
an administered trunk group, and press Enter.
2. For each entry, read the values of the following fields (see
a. Called Number
b. Called Length
c. Del
d. Insert
Table 21):
Page Field Name
1 No. Del Digits
1 Inserted Digits
1 Dialed String
1 Min
1 Max
Notes
Specifies the number of dialed digits to be
deleted from the beginning of the dialed
string. Default = 0
Specifies the digit string to be inserted at
the beginning of the dialed string.
Default = 0
Dial string entry that is used to match a
pattern within the user-dialed number
Minimum length of the user-dialed number
that the SLS call engine collects to match
to the dialed-string. Default = length of the
specified Dialed-string element.
Maximum length of the user-dialed number
that the SLS call engine collects to match
to the dialed-string. Default = length of the
Dialed-String element.
Table
Issue 3 February 2007
Configuring SLS
22):
141