Configuring logging
Displaying the status of the Syslog server
Type the show logging server condition command, followed by the IP address of the
Syslog server. If you do not specify an IP address, the command displays the status of all
Syslog servers defined for the G250/G350. As shown, the command displays whether the
server is enabled or disabled, and lists all filters defined on the server.
G350-001(super)# show logging server condition 147.2.3.66
******************************************************
*** Message logging configuration of SYSLOG
Sink Is Enabled
Sink default severity: Warning
Server name: 147.2.3.66
Server facility: auth
Server access level: read-only
Syslog sink default settings
Severity — warning
●
Facility — local 7
●
Access level — read-write
●
Syslog message format
Syslog messages are arranged chronologically and have the following format:
<34> Oct 11 22:14:15 host LINKDOWN SWICHFABRIC-Notification:Port 10/3 Link
The message provides the following information:
A priority (
●
the severity level.
A header (
●
time, the hostname, and a message mnemonic.
A message (
●
the application being logged, the severity level, and the message text.
190 Administration for the Avaya G250 and Avaya G350 Media Gateways
in this example), which is calculated based on the syslog facility and
<34>
Oct 11 22:14:15 host LINKDOWN
SWICHFABRIC-Notification: Port 10/3 Link
sink ***
in this example), providing the date and
in this example), detailing