Avaya G250 Administration page 138

Configuring Standard Local Survivability (SLS)
Table 18: ISDN-BRI administration data to assemble for SLS (continued)
*
Page
2
2
2
2
1
* Page numbers might vary for your system.
Collecting Feature Access Codes data
1. At the SAT, type display system-parameters customer-options and press
Enter to display the Customer Options form.
2. Scroll to page 5 and determine how the Multinational Locations or Multiple Locations
fields are set:
If either of these fields is set to y (enabled), then proceed to Step 3.
●
If these fields are set to n (disabled), then at the SAT type display
●
feature-access-codes and press Enter and gather the FAC information listed in
Table
3. Look up the location of the gateway, as follows:
a. At the SAT type list media-gateway and press Enter to get the gateway's
number.
b. At the SAT type display media gateway number, where number is the gateway
number you obtained in Step a. This provides you with the location field value.
●
●
138 Administration for the Avaya G250 and Avaya G350 Media Gateways
Field Name
Directory Number B
SPID-A
SPID-B
Endpt Init
Layer 1 Stable
19.
If the gateway has an administered location, at the SAT type display
locations number, where number is the administered location number. If there
is an ARS entry for the given location, then you must use this value (and only this
value) in the SLS data set.
If there is no administered location, then at the SAT type display
feature-access-codes and press Enter and gather the FAC information listed
in Table 19.
Notes
Channel B2's directory number
Service Profile Identifier required for Country Code
(USA)
Service Profile Identifier required for Country Code
(USA)
Determines whether the far end supports endpoint
initialization
Determines whether to expect the network to drop
BRI Layer 1 when no calls are active
2 of 2