Typical Object Tracking Applications - Avaya G250 Administration

2. The second step is to configure several object trackers. In this case, object tracker 1 tracks
the state of RTR 5, and object tracker 2 tracks the state of RTR 6.
G250-001(config)# track 1 rtr 5
G250-001(config-track rtr 1)# description "track rtr-5"
Done!
G250-001(config-track rtr 1)# exit
G250-001(config)# track 2 rtr 6
G250-001(config-track rtr 2)# description "track rtr-6"
Done!
G250-001(config-track rtr 2)# exit
3. The third step is to configure a track list object tracker which tracks the states of object
trackers 1 and 2, and calculates its own state using a boolean or threshold calculation.
In this case, a boolean OR argument is used. This means that the track list is up if either
object tracker 1 or object tracker 2 is up.
G350-001(config)# track 10 list boolean or
G350-001(config-track list 10)# description "track list rtr-5 and rtr-6"
Done!
G350-001(config-track list 10)# object 1
Done!
G350-001(config-track list 10)# object 2
Done!
G350-001(config-track list 10)# exit

Typical object tracking applications

Trigger the failover mechanism for VPN. See
●
object tracking
Trigger the failover mechanism for interfaces. See
●
WAN Fast Ethernet interface
policy-based routing
Track the state of a route: a static route, a PBR next hop, or the DHCP client default route.
●
For an example of how to track the DHCP client default route, see
tracking the DHCP client default route
on page 266.
on page 266, and
on page 269.
Typical application – VPN failover using
Typical application – backup for the
Typical application – interface backup via
on page 270.
Object tracking
Typical application –
Issue 3 February 2007 265