Avaya G250 Administration page 156

Configuring Standard Local Survivability (SLS)
7. If the far-end equipment is specified as pbx (set in Step 6), type set interface
glare-mode to specify the glare-handling convention. glare-mode can be any of the
following values:
For Non-QSIG calls:
●
network: If the gateway is connected to a host computer and encounters glare, it
overrides the far-end.
user: If the gateway is connected to a public network and encounters glare, it
releases the circuit.
For QSIG calls:
●
peerMaster: SLS overrides the other end when glare occurs.
peerSlave: SLS releases the circuit when glare occurs.
8. If the DS1 link is employed with ISDN, and the glare-handling convention is specified as
peerMaster or peerSlave for the ISDN link (set in Step 7), type set side side to
specify the glare mode: either a or b.
9. If the DS1 link is employed with ISDN, type set country-protocol country-code
to specify the ISDN Layer-3 country protocol type, where country-code is any of the
following values (see
156 Administration for the Avaya G250 and Avaya G350 Media Gateways
Table 27):
Table 27: ISDN Layer-3 country codes
Country Country
Code
1 United States (AT&T mode, also known as 5ESS)
2 Australia (Australia National PRI)
3 Japan
4 Italy
Netherlands
5
6 Singapore
7 Mexico
8 Belgium
9 Saudi Arabia
10 United Kingdom (ETSI)
11 Spain
12 France (ETSI)
13 Germany (ETSI)
1 of 2