Configuring IPSec VPN
Summary of configuration steps
Provided below is a list of the commands required to configure a VPN. For a step-by-step
description of the VPN procedures, see
Note:
You must configure VPN in the order shown in the summary. Parameters
Note:
appearing in bold are mandatory.
ISAKMP policy –
●
- description
- encryption
- hash
- group
- lifetime
IPSEC transform-set –
●
- set pfs
- set security-association lifetime seconds
- set security-association lifetime kilobytes
- mode (tunnel/transport)
ISAKMP peer –
●
- description
- isakmp-policy
- pre-shared-key
- initiate mode
- self-identity
- keepalive
- keepalive-track
- continuous-channel
(Optional) ISAKMP peer group –
●
- description
- set peer
452 Administration for the Avaya G250 and Avaya G350 Media Gateways
Configuring a site-to-site IPSec VPN
crypto isakmp policy
crypto ipsec transform-set
crypto isakmp peer
crypto isakmp peer-group
on page 454.