Example Of Tracking A Group Of Devices - Avaya G250 Administration

Configuring WAN interfaces

Example of tracking a group of devices

Figure 23: Tracking multiple remote devices
1. The first step is to configure several RTRs. In this case, RTR 5 tracks the device at IP
address 10.0.0.1, and RTR 6 tracks the device at IP address 20.0.0.1.
G350-001(config)# rtr 5
G350-001(config-rtr 5)# type echo protocol ipIcmpEcho 10.0.0.1
G350-001(config-rtr icmp 5)# wait-interval 2 seconds
Done!
G350-001(config-rtr icmp 5)# fail-retries 3
Done!
G350-001(config-rtr icmp 5)# success-retries 1
Done!
G350-001(config-rtr icmp 5)# exit
G350-001(config)# rtr-schedule 5 start-time now life forever
G350-001(config)# rtr 6
G350-001(config-rtr 6)# type tcpConnect dest-address 20.0.0.1 dest-port
80
G350-001(config-rtr tcp 6)# frequency 500 milliseconds
Done!
G350-001(config-rtr tcp 6)# dscp 34
Done!
G350-001(config-rtr tcp 6)# next-hop interface FastEthernet 10/2
mac-address 00:01:02:03:04:05
Done!
G350-001(config)# rtr-schedule 6 start-time now life forever
G350-001(config-rtr tcp 6)# exit
264 Administration for the Avaya G250 and Avaya G350 Media Gateways