Defining The Usb Interface; Defining Other Interfaces - Avaya G250 Administration

Media gateways
Hide thumbs Also See for G250:
Table of Contents

Advertisement

Configuration overview

Defining the USB Interface

If you intend to use a USB modem to connect to the G250/G350, you should also assign an IP
address to the USB interface. It is not necessary to include a subnet mask.
1. Use the interface USB command to enter the USB context.
2. Use the ip address command to define a new IP address for the USB interface.
The following example assigns an IP address of 10.3.3.2 to the USB interface:
G350-001(super)# interface USB
G350-001(super-if:USB)# ip address 10.3.3.2
Done!

Defining Other Interfaces

Your next step should be to define the other interfaces required by your system specifications.
See
Defining an interface
Once you have defined your interfaces, you can define a Primary Management IP address
(PMI). The PMI is the IP address which the G250/G350 uses to identify itself when
communicating with other devices, particularly the Media Gateway Controller (MGC).
Management data intended for the G250/G350 is routed to the interface defined as the PMI.
You can use any interface as the PMI. For instructions on how to define the PMI, see
Configuring the Primary Management Interface (PMI)
Once you have defined a PMI, you must register the G250/G350 with an MGC. The MGC is a
media server (call controller) that controls telephone services on the G250/G350. The MGC can
be internal or external. See
Once you have performed these steps, the G250/G350 is ready for use. Other configuration
tasks may also have to be performed, but these steps depend on the individual specifications of
your G250/G350 and your network.
Most G250/G350 configuration tasks are performed using the G250/G350 CLI. Avaya also
provides several GUI applications that are designed to perform the basic configuration tasks
described in this section. See
30 Administration for the Avaya G250 and Avaya G350 Media Gateways
on page 69.
Configuring the Media Gateway Controller (MGC)
Configuration using GUI applications
on page 70.
on page 31.
on page 71.

Advertisement

Table of Contents
loading

This manual is also suitable for:

G350

Table of Contents