Configuring PoE
Figure 26: Powered Device Detection
Plug and Play Operation
You can add and remove PDs without manually reconfiguring the switch, since it performs a
periodic automatic load detection scan on non-powered ports.
If a PD that fits the above criteria is detected on a non-powered port, then power is applied
●
to the port.
If a PD is removed from a port, then power is denied to that port. The disconnected port is
●
then scanned as well.
In addition, if the PoE module in the G350 is removed and replaced with a module of the same
type, the port power configuration of the module is retained.
280 Administration for the Avaya G250 and Avaya G350 Media Gateways