Avaya G250 Administration page 347

Table 48: Detailed CLI output per RTP session (continued)
Field
Phone
Local-Address
Remote-Address
Samples
Codec:
Label Description
The local extension number and
10
conference ID in format <conference
ID>:<extension number>.
Conference calls can involve more
than one entry in the session table.
Multiple sessions belonging to the
same conference call can usually be
identified by a common conference ID.
Notes:
Phone data is received from Avaya
●
Communication Manager only if
VMON is configured.
If you are not running VMON, you
●
can cause Avaya Communication
Manager to send the phone data
by configuring a dummy
RTCP-server for the region, with a
'localhost' ip address (127.x.x.x).
The PMI.
11
The number after the colon is the UDP
port number.
The remote VoIP engine, gateway PMI
13
or IP phone address. The number after
the colon is the UDP port number.
SSRC ID. The number in parentheses
12,
is the number of observed SSRC
14
changes during the session.
The number of times the application
15
has sampled the VoIP engine (RTP
receiver) statistics.
The sampling interval.
16
The codec used for the session.
17
The RTP packet size, in bytes.
18
The RTP packet interval, in ms.
19
Configuring and analyzing RTP statistics
From the CLI
example
Phone: 69:2011
Local-Address:
135.8.118.252:2061
Remote-Address:
135.8.76.107:2061
SSRC 2989801899 (0)
Samples: 54
sec)
Samples: 54 (5
sec)
G723
62B
30mS
Issue 3 February 2007
15
(5
16
2 of 6
347