Configuring Object Tracking - Avaya G250 Administration

Configuring WAN interfaces
8. Exit the rtr-type context, and activate the RTR using the rtr-schedule command.
Note:
To deactivate the RTR, use the no rtr-schedule command.
Note:
G350-001(config-rtr icmp 5)# exit
G350-001(config)# rtr-schedule 5 start-time now life forever

Configuring object tracking

To configure object tracking, you must first configure at least one simple object tracker, that is,
an object tracker that tracks a single RTR. If you wish, you can then configure a track list which
contains multiple simple object trackers and specifies how to calculate the overall state of the
list. Note that a track list is itself an object tracker. Therefore, you can configure track lists
containing object trackers which are either simple object trackers, or other track lists.
Configuring a simple object tracker
1. Use the track id rtr command to specify the RTR to be tracked. Enter a number
between 1-50 as the unique ID for this object tracker.
G250-001(config)# track 1 rtr 5
G250-001(config-track rtr 1)#
2. Use the description command to enter a description for the object tracker.
G250-001(config-track rtr 1)# description "track rtr-5"
Done!
Configuring a track list
1. Use the track id list command to enter track list configuration mode, to specify the
unique ID of the track list (between 1-50), and to specify how to calculate the state of the
track list. The calculation can be either a Boolean or a Threshold calculation.
G350-001(config)# track 10 list boolean or
G350-001(config-track list 10)#
Or
G350-001(config)# track 10 list threshold count
G350-001(config-track list 10)#
Note:
If you do not specify how to calculate the state of the track list, it is calculated by
Note:
default using the Boolean AND argument. This means that the list is up if all
objects are up, and down if one or more of the objects are down.
260 Administration for the Avaya G250 and Avaya G350 Media Gateways