Software And Firmware Management; File Transfer - Avaya G250 Administration

Basic device configuration
Use the show temp command to view the temperature of the G250/G350 CPU. This
●
command also displays the high and low temperatures that will trigger a temperature
warning.
Use the show voltages command to view the power supply voltages of the G250/G350.
●
Use the show utilization command to display information about CPU and memory
●
usage on the G250/G350.
Note:
Before using this command, you must first use the set utilization cpu
Note:
command to enable CPU utilization measurements.
Use the test led command to test the system ALM and MDM and system CPU LEDs on
●
the front panel of the G250/G350. The CPU and media module LEDs blink for five
seconds.

Software and Firmware Management

You can manage G250/G350 software and firmware, either:
Remotely, using an FTP, TFTP or SCP server
●
Or
Locally, using a USB mass storage device connected to the G250/G350 USB port
●

File transfer

The Avaya G250/G350 Media Gateway can be a client for the FTP and TFTP protocols. Use
either a USB device or the FTP or TFTP protocols to transfer files between the Avaya G250/
G350 Media Gateway and other devices. You can use file transfer to:
Install software and firmware upgrades on the G250/G350
●
Install firmware upgrades on media modules
●
Back up and restore configuration settings
●
84 Administration for the Avaya G250 and Avaya G350 Media Gateways