Avaya G250 Administration page 129

Media gateways

Hide thumbs Also See for G250:

Table of Contents

Collecting DCP stations data

1. At the SAT, type list media-gateway and press Enter to display a list of administered

2. Look for any of the following supported gateways in the Type field:

G250/G250-BRI/G250-DCP/G250-DS1

3. Once you know the media gateway of interest, match the gateway model with the digital

station ports:

4. At the SAT, type display port port-number, where port-number is the DCP station

port on the gateway, and press Enter.

The system displays the extension number assigned to the port.

5. Once you know the extension, type display station extension and press Enter to

display the Station form for this extension.

6. Gather the necessary information from

Table 13: DCP station form data to assemble for SLS

Security Code (Optional)

Media module

(if applicable)

The port address correlates the DCP stations that belong

to a particular media gateway. If the port ID includes the

media gateway number, then it is accepted. A new station

slot/port entry must include the "V", as in "V401".

This value is the shared secret between Communication

Manager and the media gateway and is used for the

registration of an IP Softphone (RoadWarrior)

Configuring SLS

configuration

Issue 3 February 2007