Avaya G250 Administration page 134

Configuring Standard Local Survivability (SLS)
Table 15: Trunk group data to assemble for SLS (continued)
*
Page
1
1
1
1
2
1
2
2
2
134 Administration for the Avaya G250 and Avaya G350 Media Gateways
Field Name Notes
Trunk Type Depends on trunk signaling type:
Analog DID trunks
Loop-start
●
DID
●
In-Band DS1 trunks with CO Group-Type:
Loop-start
●
Ground-start
●
In-Band DS1 trunks with Tie Group-Type:
Wink/wink
●
Wink/immediate
●
Wink/auto
●
Immediate/Immediate
●
Auto/auto
●
Auto/wink
●
Group Name Customer identification of trunk group
Codeset to Describes which Q.931 code-sets are allowed to send
Send Display Display IEs
Codeset to Describes which Q.931 code-sets are allowed to send
Send National National supported IEs
IEs
Outgoing Used for encoding Channel ID IE
Channel ID
Encoding
Digit Handling Defines overlap receiving and transmitting rules.
(in/out)
Network Send a CONNECT message before sending a
(Japan) Needs DISCONNECT message if enabled.
Connect
Before
Disconnect
Send Name Specifies whether name is to be shared with network
Send Calling Specifies whether number is to be shared with network
Number
2 of 3