Avaya G250 Administration page 249

Table 42: Modem dial backup logging messages (continued)
Log Message Severity
Dialer 1 Modem Warning
is not ready
Console Messages - Messages generated by a serial modem attached to the console
port
Modem cable Informational
detected. port
speed <speed>
baud.
Modem Warning
Detection
Failed
Modem Ready Informational
Init string error Warning
Possible cause
This message is generated
when the Dialer interface has
been triggered and the
operational state of the dialer is
up, but the dialer is unable to
communicate with the modem.
When a modem cable is
determined to be connected to
the serial port, a message is
generated indicating the
successful connection of the
modem cable and advertising
the capabilities of the serial port
for potential modem
connections.
This message is generated
when a modem cable is
connected to the serial port, but
no modem is detected. This
message is generated every 30
minutes until the modem is
detected.
When the modem is discovered
by the device and the
initialization string is successful,
a message is generated
indicating that the device is
ready to dial.
This message is generated
when the USB modem attempts
to dial and has an incorrect
initialization string. The attempt
to dial fails.
Modem dial backup
Action
Troubleshooting steps:
Check modem
●
cable connection
to serial port.
Check modem
●
cable connection
to modem.
Check power to
●
modem.
None required.
Troubleshooting steps:
Check modem
●
cable connection
to modem.
Ensure that
●
modem is powered
on.
Check modem
●
lights for an alarm.
None required.
Troubleshooting steps:
Check modem
●
configuration for
proper initialization
string.
3 of 6
Issue 3 February 2007 249