Ip-Rule Default Context - Avaya G250 Administration

Configuring monitoring applications
Table 55: Packet sniffing CLI commands in ip-rule context (continued)
Command
udp destination-port any
|{eq|lt|gt
port-name|port-number|{range
start-port end-port}}
not udp destination-port
eq|lt|gt
port-name|port-number|{range
start-port end-port}
[not] icmp name|{icmp-type
icmp-code}
dscp dscp
not dscp
Show ip-rule [all|rule-id]

Ip-rule default context

Table 56: Packet sniffing CLI commands in ip-rule default context
Command
composite-operation
name
Show ip-rule
[all|rule-id]
394 Administration for the Avaya G250 and Avaya G350 Media Gateways
Description
Set 'ip-protocol' to UDP and an
equation on the destination port
(eq=Equal, lt=Lesser,
gt=Greater). The 'not' operator
only affects the port section.
Set 'ip-protocol' to ICMP and an
equation on the types of ICMP
messages. The 'not' operator
only affects the ICP message
type.
Specify the DSCP value to be set
by the current IP rule
Show all rules or a specified rule
Description
Set the default rule action
Shows the default rule
User Level
R/W
R/W
R/W
R/W
2 of 2
User Level
R/W
R/W