Configuring Standard Local Survivability (SLS)
14. Administer ARS dial patterns for outgoing calls as described in
parameters
15. Administer digit treatment for incoming routed calls as described in
incoming-routing parameters
16. Administer the Feature Access Codes (FACs) by typing set fac feature fac, where
feature is any of the following:
●
●
●
●
●
●
and fac is a 1-4 digit string that includes the digits "0" through "9", excluding "*" and
"#" for analog rotary phones. The fac string must be unique and must not conflict with
station extension numbers and Trunk Access Codes (TACs).
Examples
set fac ars2 *9
●
●
set fac contact-close 8
Note:
The "*" and "#" characters are not available on rotary-dial, analog phones.
Note:
17. At the gateway command prompt, type exit to leave the survivable-call-engine context.
The gateway command prompt reverts to that of the original login.
18. At the gateway command prompt, type set survivable-call-engine enable to
enable SLS on the gateway.
19. At the gateway command prompt, type copy running-config startup-config to
save the changes.
150 Administration for the Avaya G250 and Avaya G350 Media Gateways
on page 170.
ars1
ars2
hold
contact-open
contact-close
contact-pulse
on page 172.
Administering dial-pattern
Administering