Avaya G250 Administration page 251

Table 42: Modem dial backup logging messages (continued)
Log Message Severity
PPP Messages - Messages generated by the PPP session
LCP Up/Down Informational
PAP passed/ Debug
failed
CHAP passed/ Debug
failed
Possible cause
LCP is used by PPP to initiate
and manage sessions. LCP is
responsible for the initial
establishment of the link, the
configuration of the session, the
maintenance of the session
while in use, and the termination
of the link. LCP is considered
Up when the link is being
established and configured, and
is considered down once the
session is fully established and
passing traffic. LCP then comes
up to pass Link Maintenance
packets during the session, and
goes down after the
maintenance is complete. LCP
comes up when a termination
request is sent, and goes down
when the link is terminated.
This message is sent when the
authenticating station responds
to the PAP authentication
request.
This message is sent when the
authenticating station responds
to the CHAP authentication
request.
Modem dial backup
Action
None required.
None required.
None required.
5 of 6
Issue 3 February 2007 251