Viewing The Capture List; Applying A Capture List - Avaya G250 Administration

Configuring monitoring applications

Viewing the capture list

Use the show ip capture-list command to display the capture list in an easy-to-read
format. For example:
G350-001# show ip capture-list 511
Index Name
----- ------------------------------- --------------------------
511 list #511
Index Protocol
DSCP
----- -------- --- ---------------- --------------- ------------ -------------
10
15
20
30
Deflt
Index Name
----- -------------------- ------------
0 Capture
1 No-Capture

Applying a capture list

To apply a capture list, use the capture filter-group command from the general context.
For example, to set the G250/G350 to use capture list 511 on interfaces in which packet sniffing
is enabled, specify the following command:
G350-001(super)# capture filter-group 511
Done!
G350-001(super)#
If no capture list is applied, the packet sniffing service captures all packets.
382 Administration for the Avaya G250 and Avaya G350 Media Gateways
IP
tcp Src Any
Any Dst Any
tcp Src Any
Any Dst Any
tcp Src 135.122.50.171
Any Dst 135.122.50.128
Any Src 135.122.50.128
Any Dst 135.122.50.171
Any Src Any
Any Dst Any
Owner
other
Wildcard
Host
0.0.0.31
0.0.0.31
Host
Trust
No
No
Port Operation
Any No-Capture
eq Telnet
eq Telnet No-Capture
Any
Any Capture
Any
Any
Any
Any No-Capture
Any